Ductwrap Insulation 18m x 1.2m x 25mm

Glasswool -  DuctWrap

Product Description

Insulation Duct roll is specifically designed as an exterior insulation for rectangular or round sheet metal ducts.

The strong foil facing and premium density of 28kg/m3 , makes this Insulation Duct roll a good solution for surfaces where temperature and condensation must be controlled.

Benefits

• High thermal performance
• TwinTech^® - smooth finish on both sides
• Sound absorbing
• No added formaldehyde
• Odourless
• Superior Handling
  - Consistent quality materials, cut easily and installs fast.
  - Highly resilient insulation recovers quickly to full thickness.

Type

Product Type	Roll
Facing Type	Foil Scrim Kraft (FSK) Faced

Use

Renovation or New Building	Renovation & New Building
Building Type	Commercial

Specifications

Material Code	R-Value (m²K/W)	Density (kg/m³)	Thickness (mm)	Width (mm)	Length (mm)	Area per pack (m²)
683677	0.7	28	25	1200	18000	21.6

Technical

PERFORMANCE

	Code	Performance
Maximum Service Temperature	EN 14706	230°C
Combustibility	AS 1530.1	Non-combustible.
Temperature Range	-	Operating temperatures up to 121°C.
Water Vapour Permeance	-	FSK and white PSK facings have maximum water vapour permeance of .02 perms.
Corrosiveness	-	Will not accelerate corrosion of aluminum, steel or copper.
Corrosion	-	The corrosion rate in mils/yr will not exceed that of the 5 ppm chloride solution
Resists Microbial Growth	-	Does not promote or support the growth of mould, fungi or bacteria.
Water Vapour Absorption	-	Less than 5% by weight when tested for 96 hours at 120°F (49°C) and 95% relative humidity.